Hub troubleshooting
This page helps when pairing the Hub in the app on your phone doesn’t go through, or when the Hub later stops responding. What the light means is on the Setting up the Hub page.
The app can’t find the Hub
Section titled “The app can’t find the Hub”The app shows Can’t find your Hub. Look at the light: if it flashes pink every few seconds, the Hub is running and ready to pair. If it doesn’t blink at all, check that the power adapter is plugged into both the socket and the Hub. Then hold your phone within 2 metres of the Hub and select Try again.
If that doesn’t help, unplug the Hub, plug it back in after 10 seconds and try again after another 30 seconds.
My Wi-Fi network isn’t in the list
Section titled “My Wi-Fi network isn’t in the list”The Hub sees only networks on the 2.4 GHz band that reach the spot where it stands. If your router broadcasts only on the 5 GHz band, turn on the 2.4 GHz band in its settings. If the Hub is far from the router, move it closer. Then select Scan again.
The app asks for location access or for Wi-Fi to be on
Section titled “The app asks for location access or for Wi-Fi to be on”The app shows Location access required, Turn on location or Turn on Wi-Fi. Without location access, Location Services and Wi-Fi turned on, the phone can’t join the Hub’s own Wi-Fi network. If the permission prompt doesn’t appear, allow the Hastr app to access your location in the phone’s settings and come back to the app.
The app says the Hub couldn’t join Wi-Fi
Section titled “The app says the Hub couldn’t join Wi-Fi”The app says it couldn’t connect to your network and asks you to check the password. Enter the password again, minding upper and lower case.
The Hub joined Wi-Fi but can’t reach Hastr
Section titled “The Hub joined Wi-Fi but can’t reach Hastr”The app says the Hub joined your network but couldn’t reach Hastr cloud or got no reply from it. Some networks block the Hub’s connection to Hastr, typically guest networks, public Wi-Fi, satellite links and strictly configured routers. Wait a minute and try again. If that doesn’t help, choose a different network.
The phone stayed on the Hub’s own Wi-Fi network
Section titled “The phone stayed on the Hub’s own Wi-Fi network”The app has no internet and shows Your phone is still on the Hub’s Wi-Fi. Select Open Wi-Fi settings and switch to your home Wi-Fi in the phone’s settings. The Hub’s own Wi-Fi network has a name starting with “HASTR-”.
Pairing ended but the Hub is offline
Section titled “Pairing ended but the Hub is offline”At the end of pairing, the app said the Hub is registered to your account but hasn’t come online yet. Give the Hub a few minutes, then look at the Overview screen. If the Hub stays offline and the light blinks green, its network is blocking the connection to Hastr. Connect it to a different network as described under “New router or new Wi-Fi password”.
The app says the Hub isn’t responding
Section titled “The app says the Hub isn’t responding”When the Hub hasn’t reported for an hour, every member of the Hub gets a push notification and an e-mail. The Hub settings screen shows Hub not responding. While the Hub is offline, no measurements arrive from its modules either.
Check that the Hub is plugged in and that the internet works on your router. If the light flashes red and white, the Hub has no Wi-Fi. If it blinks green, the Hub has Wi-Fi but can’t reach Hastr through it. Once the Hub reports again, you get a message saying “Hub responding again”.
New router or new Wi-Fi password
Section titled “New router or new Wi-Fi password”If the new network has the same name and password, the Hub joins it by itself. Otherwise the Hub’s owner connects it to the new network the same way as during setup, through Add Hub and scanning the QR code. If the Hub is still on the old network, the app shows Your Hub is already online. Select Change Wi-Fi network. The Hub stays paired with your account, and its modules and measurements stay too.
The Hub belongs to another account
Section titled “The Hub belongs to another account”The app says This Hub already belongs to another account. Ask its owner to invite you. A Hub has one owner, the account that paired it first. How the owner invites you is described on Sharing a Hub.
If the Hub is passing to you for good, the owner has to remove it: on the Hub settings screen, they select Remove Hub. All of the Hub’s modules then return to their factory state and their measurements are deleted. The Hub itself stays on its Wi-Fi, and you pair it by scanning its QR code.
Resetting the Hub itself doesn’t remove it from the owner’s account. Only Remove Hub does.
The app sends you to support
Section titled “The app sends you to support”The app says the Hub wasn’t found, that it’s missing its factory identity, or that Hastr cloud rejected it. You can’t fix this yourself. Select Report a problem and describe what happened.
If none of this helps
Section titled “If none of this helps”On the Help screen in the Hastr app, select Report a problem and describe what happened and what hasn’t helped.
Made in EU